Modular surge arrester for use in single-phase TT and TN systems (“1+1” circuit); with floating remote signaling contact.

Product Description

Modular surge arrester for use in single-phase TT and TN systems (“1+1” circuit); with floating remote signaling contact.

 

  • Prewired complete unit consisting of a base part and plug-in protection modules
  • High discharge capacity due to heavy duty zinc oxide varistors / spark gaps
  • High reliability due to “Thermo Dynamic Control” SPD monitoring device

 

Technical data

Type SLP40-275/1+1 SLP40-275/1S+1
SPD according to EN 61643-11 / IEC 61643-11 type 2 / class II type 2 / class II
Nominal a.c. voltage Un 230 / 400 V AC (50/60 Hz) 230 / 400 V AC (50/60 Hz)
Max. continuous operating a.c. voltage [L-N] Uc 275 V AC (50/60 Hz) 275 V AC (50/60 Hz)
Max. continuous operating a.c. voltage [N-PE] Uc 255 V AC (50/60 Hz) 255 V AC (50/60 Hz)
Nominal discharge current (8/20μs) In 20 kA 20 kA
Maximum discharge current (8/20μs) Imax 40 kA 40 kA
Lightning impulse current (10/350μs) [N-PE] Iimp 12 kA 12 kA
Voltage Protection level [L-N] Up 1,5 kV 1,5 kV
Voltage Protection level [N-PE] Up 1,5 kV 1,5 kV
Follow current extinguishing capability [N-PE] Ifi 100 Arms 100 Arms
Response time [L-N] tA 25 ns 25 ns
Response time [N-PE] tA 100 ns 100 ns
Max. mains-side over-current protection 125 A gL/gG 125 A gL/gG
Short-circuit current rating ISCCR 50 kA 50 kA
Temporary overvoltage (TOV) [L-N] (UT) – Characteristic 335 V / 5 sec. – withstand 335 V / 5 sec. – withstand
Temporary overvoltage (TOV) [L-N] (UT) – Characteristic 440 V / 120 min. – safe failure 440 V / 120 min. – safe failure
Temporary overvoltage (TOV) [N-PE] (UT) – Characteristic 1200 V / 200 ms – withstand 1200 V / 200 ms – withstand
Range of operating temperatures (TU) -40/+80°C -40/+80°C
Operating state / fault indication green / red green / red
Number of ports 1 1
Cross-sectional area (min.) 1.5 mm2 solid /flexible 1.5 mm2 solid /flexible
Cross-sectional area (max.) 35 mm2 stranded / 25 mm2 flexible 35 mm2 stranded / 25 mm2 flexible
For mounting on 35 mm DIN rail acc. to EN 60715 35 mm DIN rail acc. to EN 60715
Enclosure material thermoplastic thermoplastic
Place of installation indoor installation indoor installation
Degree of protection IP 20 IP 20
Capacity 2 module(s), DIN 43880 2 module(s), DIN 43880
Approvals CE CE
Type of remote signalling contact changeover contact
a.c. switching capacity 250V / 0.5 A
d.c. switching capacity 250V / 0.1 A; 125 V / 0.2 A; 75 V / 0.5 A
Cross-sectional area for remote signalling terminals max. 1.5 mm2 solid / flexible

 

<< return to products